Topic: Pdms & hysys training just got better

Courses Overview

Our Training will provide the participants with a comprehensive understanding of oil and gas facilities and enable participants to optimally manage the facilities according to the expectations and requirements of the industry.

It would also introduce participants to different facilities in the industry, their design, installation, construction and operations, maintenance as well as Health and environmental issues.

Some of our courses and programes include:

Plant Design Management System (PDMS) – Mechanical,Civil,Electrical,Process Engineers
Process Flow Design and Simulation with Aspen hysys, PipeSim & PipePhase
Pipe Stress Analysis and Design with Caeser II & SACs
Instrumentation & Controls with SCADA, PLC & Etap
Structural Designs, Analysis and Modeling with StaadPro, Orion & CAD Rc
Oil & Gas Facilities HSE Management System
Project Management & Construction Mngmnt with Primavera & MS project
Solid 3D Modeling and 2D Engineering drafting Using AutoCAd & Solid works

For further enquiries and for training registration please contact us with the information below!

Dpros Global Resources Ltd
Suite B6b, 24Road Plaza, 24 Rd, Festac Town, Lagos.
Phone: +23480-37916993
+23470-52856858
Email : [email protected]
Website: www.dgr.com.ng

Our Training will provide the participants with a comprehensive understanding of oil and gas facilities and enable participants to optimally manage the facilities according to the expectations and requirements of the industry.

It would also introduce participants to different facilities in the industry, their design, installation, construction and operations, maintenance as well as Health and environmental issues.

Some of our courses and programes include:

Plant Design Management System (PDMS) – Mechanical,Civil,Electrical,Process Engineers
Process Flow Design and Simulation with Aspen hysys, PipeSim & PipePhase
Pipe Stress Analysis and Design with Caeser II & SACs
Instrumentation & Controls with SCADA, PLC & Etap
Structural Designs, Analysis and Modeling with StaadPro, Orion & CAD Rc
Oil & Gas Facilities HSE Management System
Project Management & Construction Mngmnt with Primavera & MS project
Solid 3D Modeling and 2D Engineering drafting Using AutoCAd & Solid works

For further enquiries and for training registration please contact us with the information below!

Dpros Global Resources Ltd
Suite B6b, 24Road Plaza, 24 Rd, Festac Town, Lagos.
Phone: +23480-37916993
+23470-52856858
Email : [email protected]
Website: www.dgr.com.ng

Some of our courses and programes include:

Plant Design Management System (PDMS) – Mechanical,Civil,Electrical,Process Engineers

Process Flow Design and Simulation with Aspen hysys, PipeSim & PipePhase

Pipe Stress Analysis and Design with Caeser II & SACs

Instrumentation & Controls with SCADA, PLC & Etap

Structural Designs, Analysis and Modeling with StaadPro, Orion & CAD Rc

Oil & Gas Facilities HSE Management System

Project Management & Construction Mngmnt with Primavera & MS project

Solid 3D Modeling and 2D Engineering drafting Using AutoCAd & Solid works

For further enquiries and for training registration please contact us with the information below!

Dpros Global Resources Ltd
Suite B6b, 24Road Plaza, 24 Rd, Festac Town, Lagos.
Phone: +23480-37916993
+23470-52856858
Email : [email protected]
Website: www.dgr.com.ng

Just in case you missed out on the last months training session on Piping/Plant Design, Process Design, Pipe Stress Analysis, Project Management or any of our soft skills training packages at Dpros Consults, the opportunity is here again!. Avail yourself the opportunity to acquire the skills to kick off your career development process with more skills/options to boost your profile in 2013.

Our training packages exposes you to practical engineering and gives you an edge over your colleagues in the oil and gas field.
Our training materials are very comprehensive and specifically tailored to give the trainee as practical understand of each package
Our instructors are professional engineers & consultants with practical experience in the divers engineering projects, design, simulation, analysis etc
We also offer one on one training options for each package with a very flexible time table very suitable for your busy schedules.

WHAT YOU WILL GAIN

-Proficient engineering skills in Design-simulation-modeling-analysis etc
-interactive and practical hands-on training sessions
-Free E-books and training manuals
-Free software installation
-Free refreshers class anytime after your training
-A Certificate on satisfactory completion of training

Some of our courses and programes include:

Plant Design Management System (PDMS) – Mechanical,Civil,Electrical,Process Engineers

Process Flow Design and Simulation with Aspen hysys, PipeSim & PipePhase

Pipe Stress Analysis and Design with Caeser II

Instrumentation & Controls with SCADA, PLC & Etap

Structural Designs, Analysis and Modeling with StaadPro, Orion & CAD Rc

Oil & Gas Facilities HSE Management System

Project Management & planning with Primavera p6

Autocad 2D & 3D engineering designs,drafting and modeling

At Dpros consults, our mission is to help young engineers acquire and develop world class engineering skills to aid him/her maximize and utilize the full potentials of his/her career opportunities
For further enquiries and for training registration please contact us with the information below!
[b]
Dpros Global Resources Ltd
Suite B6b, 24Road Plaza, 24 Rd, Festac Town, Lagos.
Phone: +23480-37916993
+23470-52856858
Email : [email protected]

for further information and for registration, give us a call or visit our office

DGR Consults Ltd

Suite B6b, 24Road Plaza,
24 Rd, Festac Town, Lagos.

Phone: 08037916993 or 07052856858

Email : [email protected]
Website: www.dgr.com.ng


Thank you for taking time to contact us and for giving us this opportunity to serve you!

Re: Pdms & hysys training just got better

Our Training will provide the participants with a comprehensive understanding of oil and gas facilities and enable participants to optimally manage the facilities according to the expectations and requirements of the industry.

It would also introduce participants to different facilities in the industry, their design, installation, construction and operations, maintenance as well as Health and environmental issues.

Some of our courses and programes include:

Plant Design Management System (PDMS) – Mechanical,Civil,Electrical,Process Engineers
Process Flow Design and Simulation with Aspen hysys, PipeSim & PipePhase
Pipe Stress Analysis and Design with Caeser II & SACs
Instrumentation & Controls with SCADA, PLC & Etap
Structural Designs, Analysis and Modeling with StaadPro, Orion & CAD Rc
Oil & Gas Facilities HSE Management System
Project Management & Construction Mngmnt with Primavera & MS project
Solid 3D Modeling and 2D Engineering drafting Using AutoCAd & Solid works

For further enquiries and for training registration please contact us with the information below!

Dpros Global Resources Ltd
Suite B6b, 24Road Plaza, 24 Rd, Festac Town, Lagos.
Phone: +23480-37916993
+23470-52856858
Email : [email protected]
Website: www.dgr.com.ng

Are you EMPLOYED, UNEMPLOYED or facing REDUNDANCY in your career as an Engineer? DO YOU DESIRE TO MOVE YOUR CAREER TO THE NEXT LEVEL? IF YES! THEN setting your career on a more positive path couldn't be much easier than this and i bet You must have waited so long for this, its time to match on ahead.
Did it ever occur to you that you have better chances of securing a good paying job when you have the right skills employers are looking for? why not take some time now and upgrade your skills to a world class standard for your industry. Stop Wasting Time on The same Spot hoping things will change.

what ever your level is in your career as an engineer and however busy your schedules maybe, at DGR consults, we have tailored flexible Engineering soft-skills training programs to suit your level and at a very affordable rate. we get you equipped with the right skills set that will give your an edge over your colleagues in the industry.

Some of Our Training Courses Are As follows

PDMS 12.0, (Plant Design management system).....

Aspen HYSYS(process Flow Simulation & Design)..........

AutoCAD 2D & 3D (Engineerinf Design and 3D Modeling)......

Primavera P6 (For Project Management, Scheduling & Planning)....

Caesar II ( pipe stress Analysis and design)....................

Orion 15 & 16 (Structural Analysis, Modeling & Designs).......

Etap (for Electrical Engineers)...................... etc


What’s In It For You?

Develop new skills & Keep your skills competitive
Boost your career opportunities
Gain a competitive advantage in your career
Gain a thorough understanding of Oil & Gas Projects
Gain Practical Knowledge of Engineering Design Codes and Standards
Course Tutor support from professional Engineers & free refresher course
Interactive one on one Class sessions and Hands on Design PROJECTS by student



All our training packages are 99% practical with real life illustrations delivered by practicing engineers/consultants, with very comprehensive training materials/manuals. Don't miss this chance!
call us today and book for your training.
contact

Tel: 08037916993 or 07052856858

DGR Training Center
suite B6b, 24 road Plaza,
24 road, Festac town, Lagos.

or log on to www.drg.com.ng for more info

for further information and for registration, give us a call or visit our office

DGR Consults Ltd

Suite B6b, 24Road Plaza,
24 Rd, Festac Town, Lagos.

Phone: 08037916993 or 07052856858

Email : [email protected]
Website: www.dgr.com.ng

WE ARE AN ENGINEERING TRAINING CONSULTING FIRM WITH A MANDATE TO TRAIN MEN AND WOMEN WHO ARE DESIROUS OF ACQUIRING SKILLS AND HIGHER STUDIES IN VARIOUS BRANCHES OF ENGINEERING (MECHANICAL,STRUCTURAL, CHEMICAL AND ELECTRICAL).

OUR TRAINING IS BASED ON SOUND ENGINEERING PRINCIPLES AND METHODOLOGY, APPLICABLE CODE REQUIRE-MENTS AND BEST INDUSTRY PRACTICES.

Some of Our Training Courses Are As follows

PDMS 12.0, (Plant Design management system).....

Aspen HYSYS(process Flow Simulation & Design)..........

AutoCAD 2D & 3D (Engineerinf Design and 3D Modeling)......

Primavera P6 (For Project Management, Scheduling & Planning)....

Caesar II ( pipe stress Analysis and design)....................

Orion 15 & 16 (Structural Analysis, Modeling & Designs).......

Etap (for Electrical Engineers)...................... etc

YOUR PERFECT JOB IS OUT THERE
THE EDUCATION YOU NEED TO GET IT IS RIGHT HERE
YOUR INVESTMENT IN TRAINING IS AN INVESTMENT IN YOUR CORE CAREER VALUE.

for further information and for registration, give us a call or visit our office

DGR Consults Ltd

Suite B6b, 24Road Plaza,
24 Rd, Festac Town, Lagos.

Phone: 08037916993
07052856858

Email : [email protected]
Website: www.dgr.com.ng


Thank you for taking time to contact us and for giving us this opportunity to serve you!

WE ARE AN ENGINEERING TRAINING CONSULTING FIRM WITH A MANDATE TO TRAIN MEN AND WOMEN WHO ARE DESIROUS OF ACQUIRING SKILLS AND HIGHER STUDIES IN VARIOUS BRANCHES OF ENGINEERING (MECHANICAL,STRUCTURAL, CHEMICAL AND ELECTRICAL).

OUR TRAINING IS BASED ON SOUND ENGINEERING PRINCIPLES AND METHODOLOGY, APPLICABLE CODE REQUIRE-MENTS AND BEST INDUSTRY PRACTICES.

Some of Our Training Courses Are As follows

PDMS 12.0, (Plant Design management system).....

Aspen HYSYS(process Flow Simulation & Design)..........

AutoCAD 2D & 3D (Engineerinf Design and 3D Modeling)......

Primavera P6 (For Project Management, Scheduling & Planning)....

Caesar II ( pipe stress Analysis and design)....................

Orion 15 & 16 (Structural Analysis, Modeling & Designs).......

Etap (for Electrical Engineers)...................... etc

YOUR PERFECT JOB IS OUT THERE
THE EDUCATION YOU NEED TO GET IT IS RIGHT HERE
YOUR INVESTMENT IN TRAINING IS AN INVESTMENT IN YOUR CORE CAREER VALUE.

for further information and for registration, give us a call or visit our office

DGR Consults Ltd

Suite B6b, 24Road Plaza,
24 Rd, Festac Town, Lagos.

Phone: 08037916993
07052856858

Email : [email protected]
Website: www.dgr.com.ng


Thank you for taking time to contact us and for giving us this opportunity to serve you!

YOUR SEARCH ENDS HERE

WE ARE AN ENGINEERING TRAINING CONSULTING FIRM WITH A MANDATE TO TRAIN MEN AND WOMEN WHO ARE DESIROUS OF ACQUIRING SKILLS AND HIGHER STUDIES IN VARIOUS BRANCHES OF ENGINEERING (MECHANICAL,STRUCTURAL, CHEMICAL AND ELECTRICAL).

OUR TRAINING IS BASED ON SOUND ENGINEERING PRINCIPLES AND METHODOLOGY, APPLICABLE CODE REQUIRE-MENTS AND BEST INDUSTRY PRACTICES.

Some of Our Training Courses Are As follows

PDMS 12.0, (Plant Design management system).....

Aspen HYSYS(process Flow Simulation & Design)..........

AutoCAD 2D & 3D (Engineerinf Design and 3D Modeling)......

Primavera P6 (For Project Management, Scheduling & Planning)....

Caesar II ( pipe stress Analysis and design)....................

Orion 15 & 16 (Structural Analysis, Modeling & Designs).......

Etap (for Electrical Engineers)...................... etc

YOUR PERFECT JOB IS OUT THERE
THE EDUCATION YOU NEED TO GET IT IS RIGHT HERE
YOUR INVESTMENT IN TRAINING IS AN INVESTMENT IN YOUR CORE CAREER VALUE.

for further information and for registration, give us a call or visit our office

DGR Consults Ltd

Suite B6b, 24Road Plaza,
24 Rd, Festac Town, Lagos.

Phone: 08037916993
07052856858

Email : [email protected]
Website: www.dgr.com.ng


Thank you for taking time to contact us and for giving us this opportunity to serve you!