Wireless Systems and Network Engineering

Wireless Systems and Network Engineering (CCNA & CWNA)


This is one course that fuses the core details of networking and wireless networking together to give you a detailed understanding of networking. It covers the full curriculum of CCNA and CWNA and as such leads to the certification.

Course content:
CCNA CURRICULUM
• Internetworking
• Introduction to TCP/IP
• Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
• Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
• Managing a Cisco Internetwork
• IP Routing (RIP &RIPv2)
• Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
• Layer 2 Switching and Spanning Tree Protocol (STP)
• Virtual LANs (VLANs)
• Security
• Network Address Translation (NAT)
• Cisco’s Wireless Technologies
• Internet Protocol Version 6 (IPv6)
• Wide Area Networks (WAN)
CWNA CURRICULUM
• Wireless LAN and its applications.
• Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
• Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
• Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
• Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
• Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
• 802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
• MAC and Physical Layers (RTS/CTS and Modulation)
• WLAN set up and management (SOHO, PTP, PTMP and WISP)
• Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput)
• Wireless LAN Security and security policies.
• Site Survey Fundamentals

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of wireless systems network planning & Radio frequency (RF) plus systems networking gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Call now to book a class and enjoy 20% discount

We conduct the best of training services.

We deliver live practicals sessions with modern RF devices

we train and fix you up with a company for internship... try us today!

BSS Field Support Engineering Training!!!

This course exposes to you the core of Network planning and Engineering, Microwave Transmission & wireless network planning and GSM Engineering. Its covers the entire CCNA, CWNA and GSM Engineering curriculum. It’s well structured to suit your professional expectations.
Course content:
Network Planning and Engineering (CCNA)
Internetworking
Introduction t...o TCP/IP
Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Managing a Cisco Internetwork
IP Routing (RIP &RIPv2)
Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Layer 2 Switching and Spanning Tree Protocol (STP)
Virtual LANs (VLANs)
Network Security
Network Address Translation (NAT)
Cisco’s Wireless Technologies
Internet Protocol Version 6 (IPv6)
Wide Area Networks (WAN)

Microwave Transmission & Wireless Networking
Wireless LAN and its applications.
Radio Frequency (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathematics.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals

GSM Engineering
• Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
• Features of GSM and GPRS network Architecture.
• GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
• GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
• Channels on the air interface (Physical and Logical channels).
• Radio interference optimization (power control and interference).
• Call setup, Hand over and Call termination.
• Introduction GPRS.
• Introduction UMTS.
Duration
Corporate training 15 Days
Individual training 3 mths (weekdays)
Individual training 6 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Field support Engineer (Transmission and Networking) is the perfect course for professionals and aspiring professionals in the industry. It’s also one of the most sought after professions in the telecoms industry as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay packageand benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

keep calling .... thanks for believing in us.

Good morning

Our clients are gainfully employed after the training.

www.ht-engineering.net/training.html for more info.

Book for a class now and enjoy 25% discount....

We train with state of the art devices.... Register now

We don't just train you, we fix you up for an internship...

Intensive training courses on Oil and Gas Plant Design and Management System (PDMS), Piping and Piping System Design (CEASEAR 2), Petroleum Expert Integrated Production Modeling toolkit (GAP &PROSPER), 2D Orthographic & 3D CGS Solid modeling, Health safety and Environment (HSE), Network Planning and Engineering, Microwave transmission and Network Engineering, BSS Field support Engineer, Radio(RF) Network Planning Engineer etc TRAINING OBJECTIVE: Based on the Nigeria Content Development Policy, FEED and Detailed Engineering Design for all projects are to be domiciled in Nigeria. This training therefore aims at providing participants with the necessary skills to grab the numerous job opportunities this new policy is bringing. High Tech Engineering shall enlist the best Participants for possible employment to its Design and Consultancy outfit and assist in both local and international placement. COURSE HIGHLIGHT • Petroleum Expert Integrated Production Modeling toolkit (GAP &PROSPER) • Plant Design and Management System (PDMS) • 2D Orthographic & 3D CGS Solid modeling • Piping and Piping System Design (CEASEAR 2) • Health safety and Environment (HSE) • Project Management (Primavera & Microsoft office Project) • Network Planning and Engineering • Microwave transmission and Network Engineering, • BSS Field support Engineer • Radio(RF) Network Planning Engineer • Telecommunication Engineering • Data Communication Engineering etc WHO SHOULD ATTEND? Engineering and Science professionals in Oil and Gas, Telecommunication/ICT sector who wish to acquire skills in Engineering Designs and Telecommunication Engineering in order to meet up with the forthcoming challenges in the Oil & Gas and Telecommunication industry. CERTIFICATE WILL BE ISSUED TO PARTICIPANTS (REGISTER NOW AND ENJOY 25% DISCOUNT) CONTACT HIGH TECH IT & ENGINEERING SUITE 216 EUGENE PLAZA 14 WOJI ROAD RUMUOGBA PORT HARCOURT RIVERS STATE, NIGERIA PHONE: 234 (0) 7035816455, 08180178962, 08154940467 E-MAIL: [email protected] WEBSITE: www.ht-engnieering.net

Our trainers are certified instructors with field experinces

Build the career of your dreams with us.

Call us now to book a class.

Call now to book a class with 20% discount.

Choose your career wisely!

At your services!

Discount training still applies. Register today

W nurture, we train, we recommend !

Radio Network Planning

Radio Network Planning broadens your horizon on the core of Wireless Networking as covered in CWNA curriculum and GSM Engineering. It gives you a complete understanding of wireless networking and communication.

Course content:
Wireless LAN and its applications.
Radio Frequenc...y (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathemati...cs.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals
Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
Features of GSM and GPRS network Architecture.
GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
Channels on the air interface (Physical and Logical channels).
Radio interference optimization (power control and interference).
Call setup, Hand over and Call termination.
Introduction GPRS.
Introduction UMTS.

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of wireless systems network planning and Radio frequency (RF) plus GSM engineering gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Discount training still applies. Book for a class today!

Radio Network Planning

Radio Network Planning broadens your horizon on the core of Wireless Networking as covered in CWNA curriculum and GSM Engineering. It gives you a complete understanding of wireless networking and communication.

Course content:
Wireless LAN and its applications.
Radio Frequenc...y (RF) Fundamentals, RF behaviors, RF Antenna concepts and RF mathemati...cs.
Spread Spectrum Technology (FHSS,DSSS, OFDM and MIMO)
Wireless LAN Infrastructure Devices (Access points, Routers, Switches and Bridges)
Antennas and Accessories, Antenna categories and types, Antenna location and Installations.
Wireless LAN Organizations and Standards (FCC rules, IEEE and Wi-Fi alliance)
802.11 Network Architecture (SSID, Roaming, Positioning, Authentication and Power Management)
MAC and Physical Layers (RTS/CTS and Modulation)
WLAN set up and management (SOHO, PTP, PTMP and WISP)
Troubleshooting Wireless LAN Installations (Multipath, Hidden Node, Near Far, RF interference, Throughput and Weather.)
Wireless LAN Security and security policies.
Site Survey Fundamentals
Introduction and Evolution of GSM (HSCSD, GPRS, EDGE, UMTS).
Features of GSM and GPRS network Architecture.
GSM and GPRS network components (MS, TC, BTS, BSC, BSS, OMC, MSC, GMSC, PSTN NSS etc).
GSM terrestrial interfaces (Um, A, A-ter, Abis etc).
Channels on the air interface (Physical and Logical channels).
Radio interference optimization (power control and interference).
Call setup, Hand over and Call termination.
Introduction GPRS.
Introduction UMTS.

Duration
Corporate training 10 Days
Individual training 2 mths (weekdays)
Individual training 4 mths (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professional in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of wireless systems network planning and Radio frequency (RF) plus GSM engineering gives you an edge in the labor market. It stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high salary and benefits. For more information contact [email protected] or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Join our next class.... call now!

Call now .. discount prices still applies.

Call now to book a class and enjoy 20% discount

To book a seat call or text your name to 07035816455 now...Cheers

To book a class call or text your name to 07035816455

Remember to call now to book your seat!

To book a class call or text your name to 07035816455 now!

We don't just train you, we fix you up for an internship...