Vacancies in Multinational Oilfield Service Provider

1. SUBSEA SUPERVISOR
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Supervise the maintenance and repair of all subsea BOP and riser systems, Multiplex electro-hydraulic control systems, and all associated surface equipment and systems.

PREREQUISITES / QUALIFICATIONS:
· Bsc / HND - Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Minimum of one year experience working with a Multiplex system.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Valid medical examination and vaccination certificates.
· Knowledge of all technical calculations required for the subsea operation of the drilling unit and basic computer skills.


DUTIES AND RESPONSIBILITIES:

• Maintain the Blow Out Preventer (BOP), Diverter, and associated subsea equipment in accordance to the Preventive Maintenance System (PMS) guidelines.
• Operate and pressure test the BOP on the surface and on the seabed as required.
• Direct the deck and drill crews in the running and recovery of the BOP and Marine Riser equipment.
• Direct the assembly, installation, and nipping down the BOP and all well control equipment as required.
• Operate, maintain and repair the subsea BOP control system, i.e. surface BOP or multiplex electro-hydraulic control systems.
• Operate, maintain and test hydraulic connectors. Maintain BOP handling equipment, testing equipment and wellhead equipment.
• Operate and service the bridge cranes and related hoisting equipment. Ensure the drill string compensator is serviced as required.
• Ensure the riser pipe system is serviced and tested as required. Operate and maintain the diverter system and the running and handling tools.
• Assist in running/testing the wellhead, casing hangers and seal assemblies. Operate and maintain wellhead running/retrieval test tools.
• Ensure the required riser tensioning pressure is set to comply with the mud weight in use. Monitor and maintain the riser guideline and pod line tensioners
• Maintain accurate daily log sheets relevant to the subsea equipment. Maintain records of BOP and associated equipment tests.
• Maintain records of inspection and certification of subsea equipment.
• Ensure an adequate supply of spares is maintained in order to fulfil maintenance requirements and facilitate a safe and efficient operation.
• Maintain records of ton-miles on wire ropes. Slip and cut according to the agreed program.
• Ensure Supervisor is informed of any issues relating to the subsea equipment, which may affect the safe and efficient running of operations.
• Ensure that the permit to work system is in place and followed.
• Liaise with the marine department prior to moving the BOP and marine riser package in lieu of the rig’s stability.
• Assist in supplying information for maintenance and repair budget.
• Assist in communicating equipment problems or breakdown with Field Support group and equipment vendor.

2. ASSISTANT SUBSEA OPERATOR
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Assist the Subsea Supervisor with the maintenance and repair of all subsea systems and associated surface equipment, riser tensioning system, and drill string compensation systems onboard the rig.

PREREQUISITES / QUALIFICATIONS:
· B.Sc /Higher National Diploma (HND) in Engineering.
· Minimum 1year relevant work experience.
· Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Knowledge of all technical calculations required for the safe operation of the marine aspect of the rig.
· Basic computer skills.
· Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:
· Assist with maintaining the Blow Out Preventer (BOP), Diverter, and associated subsea equipment in accordance to the Preventive Maintenance System (PMS) guidelines.
· Operate and pressure test the BOP on the surface and on the seabed as required.
· Assist the Subsea Supervisor in the running and recovery of the BOP and Marine Riser equipment
· Assemble, install, and nipple down the BOP and all well control equipment as required.
· Assist in operating, maintenance and repair of subsea BOP control system, i.e. surface BOP or multiplex electro-hydraulic control systems.
· Operate, maintain and test hydraulic connectors. Maintain BOP handling equipment, testing equipment and wellhead equipment.
· Operate and service the bridge cranes and related hoisting equipment. Service the drill string compensator as required.
· Service and test the riser pipe system. Operate and maintain the diverter system, and the diverter running and handling tools.
· Assist in running and testing the wellhead, casing hangers and seal assemblies. Operate and maintain the wellhead running and retrieval test tools.
· Assist in monitoring and maintaining the riser tensioner, guidelines and pod line tensioners
· Maintain accurate daily log sheets relevant to the subsea equipment.
· Maintain records of BOP and associated equipment test
· Assist in maintaining records of inspection and certification of subsea equipment.
· Maintain an adequate supply of spares in order to fulfill maintenance requirements – inform the Subsea Supervisor when there is need to reorder.
· Calculate and record ton-miles on wire ropes. Slip and cut according to the agreed program.
· Ensure supervisors are informed of any issues relating to the subsea equipment, which may affect the safe and efficient running of operations.
· Comply with the permit to work and isolation system
· Assist in supplying information for maintenance and repair budget.
· Assist in communicating equipment problems or breakdown with Field Support group and equipment vendor.

3. BALLAST CONTROL OPERATOR (BCO)
Location : Nigeria
Company: Reputed multinational oilfield service provider


BASIC FUNCTION:

• Operate the ballast control system so as to maintain the rig’s position, draft and trim with respect to well location.

PREREQUISITES / QUALIFICATIONS:

• Bsc / HND- Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.

· Proven ability to discharge the stated duties and responsibilities of the position.

• Knowledge of basic technical calculations required for the safe operation of the marine aspect of the drilling unit.
• Basic computer skills.
• Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:

• Ballast and de-ballast the rig as required to maintain station.
• Monitor all ballast controls and related instrumentation. Also monitor the location of supply vessels, standby boats and helicopters.
• Record reports pertaining to stability, boat and helicopter movements, safety drills and rig activities in the daily logbook.
• Maintain a continuous listening watch on VHF radio and maintain regular communication with supply and standby vessels.
• Monitor variable deck load on a daily basis to calculate and maintain the rig’s stability.
• Prepare the daily and weekly stability report for the rig.
• Monitor fire alarms, engine conditions, gas detection alarms and take action as directed on Station Bill.
• Coordinate all helicopter and supply boat traffic to and from the rig.

· Assist in supervising the transfer of bulk materials to and from rig. Keep records of all bulk materials movement.
· Monitor quantities of expendables such as fuel, potable water, drill water and report findings to Barge Supervisor.
· Inform the Barge Supervisor or Assistant Barge Supervisor about any anomalies, which may affect the safe and efficient operation of the rig.
· Carry out Preventive Maintenance on ballast control equipment and other marine equipment as required.
· Inspect ballast equipment and other marine operations and lifesaving equipment, as required, for safe working conditions.
· Test fire fighting equipment, obstacle lighting, and audible signals.
· Monitor the weather conditions and rig motions.
· Assist in supervising the deck crew during routine and non-routine marine operation.
· Assist the Barge Supervisor in carrying out rig move plans, aid anchor handling boats, and perform mobilization and demobilization preparations.

4. BARGE MASTER
Location : Nigeria
Company: Reputed multinational oilfield service provider


BASIC FUNCTION:

• Ensure that all marine aspects of the rig’s operations are carried out in accordance to statutory and regulatory controls and guidelines.
• Supervise the operation of the marine department to ensure the safe and efficient running of the rig.

PREREQUISITES / QUALIFICATIONS:

• Bsc / HND – Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Proven ability to discharge the stated duties and responsibilities of the position.
• Knowledge of all technical calculations required for the safe operation of the marine aspect of the drilling unit.
• Basic computer skills.
• Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:

• Monitor the weather conditions and rig motions – advise OIM on conditions likely to affect drilling operations and seaworthiness of the rig.
• Ensure that accurate calculation of load distribution and weights for daily stability reports and lightship are maintained.
• Coordinate all helicopter and supply boats traffic - supervise movement of materials and personnel to and from the rig. at all times.

· Monitor quantities of expendables such as fuel, potable water, drill water, et cetera.
· Ensure that cranes are in safe working condition.
· Ensure all safety equipment, including lifeboats and fire-fighting equipment is maintained in a state of operational readiness at all times.
· Actively participate in the daily operations meeting with the OIM and other rig department heads.
· Operate and maintain the bulk system as required.
· Supervise tests on fire fighting equipment, obstacle lighting and audible signals.
· Ensure all lifting gears are inspected and certified, correctly color coded, maintained, and stowed properly.
· Prepare and supervise rig move plans, and associated mobilization preparations.
· Ensure that daily marine logs are accurate and completed. Forward copies of these reports to the shore-base office.
· Ensure that all Flag State, Classification Society, statutory regulation, and minimum manning requirements are complied with.
· Coordinate and supervise periodic inspections of the rig’s structure, including hull compartments and critical joints.
· Assist in the effective management of the Preventive Maintenance System and ensure all records are properly maintained.

· Supervise the operation and maintenance of pollution control system.

• Ensure all navigation equipment is properly maintained and ready for use

5. MASTER
Location : Nigeria
Company: Reputed multinational oilfield service provider


BASIC FUNCTION:

• Exercise overriding authority and discretion to take whatever action is required for the safety of the crew, drilling vessel and protection of the environment.
• Provide marine support to the industrial operation of the drilling vessel.

PREREQUISITES / QUALIFICATIONS:

• Bsc/ HND or equivalent in Engineering/Marine Operations.
• Experience in marine operations, and in the Master position.
• Demonstrated oral and written communication skills.
• Proven ability to discharge the stated duties and responsibilities of the position.
• Valid Unlimited Oceangoing Masters certificates, Nautical Institute Dynamic Positioning Training courses and Nautical Institute DP Certificate
• Knowledge of all technical calculations required for the safe operation of the marine aspect of the rig.
• Basic computer skills.
• Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:

• Assume the required regulatory responsibility to exercise effective control and efficient operation of the vessel with due regard for the safety of the crew, the vessel, its contents and the protection of the environment.

• Ensure the rig is seaworthy at all times and maintained/operated in accordance with guidelines in the Marine Operations Manual.
• Supervise the maintenance of deck equipment, fire fighting and life-saving equipment, lifting equipment, and rig’s exterior maintenance.
• Ensure conformance to local/international laws relating to the rig’s operation, and strictly comply with current pollution regulations.
• Exercise overall control in maintaining the watertight integrity of the rig, loading and storage of consumables, securing of supply vessels, safe operation of helicopters, et cetera.
• Ensure materials and equipment loaded onboard are safely stowed, secured and labeled according to Regulatory requirements.
• Ensure the rig is maintained within normal safe limits of intact and damage stability, shear stress and bending moments.
• Supervise the various stages of rig moves and anchor handling/dynamic positioning operations between drilling locations and in ports.
• Partake in the daily operations meeting with the OIM and other rig department heads.

· In relation to the rig’s trim and stability requirements, communicate with the Chief Engineer regarding the disposition, loading, ordering and use of fuel, potable and drill water.
· Administer rig’s continuous surveys and renewal of statutory certificates as required by Classification Society and statutory regulations.
· Ensure the rig’s navigational equipment is maintained, fully functional, and that testing and calibration is carried out in accordance with Safety of Life at Sea (SOLAS) regulations.
· Maintain the rig’s logbook, maintenance reports and other documents as directed.
· Capable of performing DP incident investigation.

6. OFFSHORE INSTALLATION MANAGER
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Manage the manpower and resources of the rig to achieve optimum performance so as to ensure the well program is carried out in a safe, efficient and productive manner.
· Promote and ensure that all Company Policies and Procedures are communicated and understood by personnel on the rig.


EDUCATIONAL QUALIFICATIONS/REQUIRMENT:

• HND/Bsc - Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
• Proven ability to discharge the stated duties and responsibilities of the position.
• Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:

• Manage the planning and efficient execution of the drilling program in coordination with Client Representative and rig department heads.
• Hold daily operations meeting with Client Representative and rig department heads.
• Ensure pre-job meeting is carried out for hazardous situations and non-routine operations.
• Monitor all onboard equipment and systems usage, supervise testing and inspection of critical equipment and systems, and ensure operational parameters and limits are observed.
• Monitor the application of the Company Preventative Maintenance System program. Ensures equipment and systems are operational by setting priorities on equipment repairs
• Organize and supervise the activities of drilling, marine and maintenance departments and ensure rig specific procedures are understood and observed by all personnel onboard.
• Responsible, along with Client Representative, for all third party services on the rig.
• Promote and maintain a good working relationship with Client Representatives, department heads, and third party personnel.
• Ensures rig complies with Flag State and certifying Regulatory Bodies requirements.
• Maintain daily communication with the Rig Manager on all relevant activities regarding the rig’s operation and needs.
• Plan operations with the Marine department as related to rig moves, mooring, station keeping and stability. Ensure guidelines of the rig's Marine Operations Manual are understood and followed.
• Supervise and perform jacking operations for jack-up drilling units.
• Promote and maintain effective working relationship with other departments, third party personnel and Client Representatives.

7. CHIEF MATE
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Assist the Master in exercising effective control over the rig’s marine operations with due regard for safety of personnel, maintenance of rig equipment, and protection of the environment.

PREREQUISITES / QUALIFICATIONS:
· HND/Bsc - Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Valid Unlimited Chief Mate certificate, Nautical Institute Dynamic Positioning Training courses and Nautical Institute DP Certificate
· Knowledge of all technical calculations required for the safe operation of the marine aspect of the rig.
· Basic computer skills.
· Valid medical examination and vaccination certificates.


DUTIES AND RESPONSIBILITIES:

• Ensure conformance to local/international laws relating to the vessel’s operation, and strictly comply with current pollution regulation.
• Oversee the maintenance of deck equipment, fire fighting and life-saving equipment, lifting equipment, and vessel’s exterior maintenance.
• Ensure materials and equipment loaded onboard are safely stowed, secured and labeled according to Regulatory requirements.
• Ensure the vessel is seaworthy at all times and maintained/operated in accordance with guidelines in the Marine Operations Manual.
• Maintaining the watertight integrity of the vessel, loading and storage of consumables, securing of supply vessels, safe operation of helicopters, et cetera.
• Ensure the vessel is maintained within normal safe limits of intact and damage stability, shear stress and bending moments.
• Assist the Master in ensuring the vessel’s navigational equipment is maintained, fully functional, and that testing and calibration is carried out in accordance with Safety of Life at Sea (SOLAS) regulations.
• Assist the Master in maintaining the vessel’s logbook, maintenance reports and other vessel documents as directed.
• Understudy the Master and deputize when he/she is indisposed.
• Supervise the 2nd Mate’s activities and perform the duties of a DPO when required.
• Assist the Master/Senior Mate during rig moves and anchor handling operations between drilling locations and in ports.
• In relation to the vessel’s trim and stability requirements, communicate with the Chief Engineer regarding the disposition, loading, ordering and use of fuel, potable and drill water.
• Capable of performing DP incident investigation
• Capable of planning, executing, and leading DP trials and drills including black out recovery.

8. SENIOR DYNAMIC POSITIONING OPERATOR (DPO)
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Operate the automated and fixed station keeping system of the rig.

EDUCATIONAL/PREREQUISITE QUALIFICATIONS:
· HND/Bsc - Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Nautical Institute Dynamic Positioning Training courses.
· Knowledge of all technical calculations required for the safe operation of the marine aspect of the rig.
· Three years experience as a DPO
· Basic computer skills.
· Valid medical examination and vaccination certificates.


DUTIES AND RESPONSIBILITIES:

• Operate dynamic positioning (DP) equipment.
• Maintain logbook of all position keeping equipment and relevant engine room equipment.
• Set up operational parameters for the DP system – ensure system data is correct.
• Advise the Chief Mate or Master of potential position loss.
• Perform Preventive Maintenance on DP equipment – ensure the system’s performance is not degraded by defective sensors.
• Ensure that all defects and anomalies are reported to the Chief Mate or Master and relevant department heads. Maintain records of these and ensure they are corrected adequately
• Assist with the operation of the ballast control system where applicable.
• Operate and understand ballast control system, power management systembilge system, ventilation system, engine room auxiliaries, drill water systemfuel system, and fire and gas system.
• Maintain the rig in a stable condition and at the correct draft and trim.

· Monitor required engine room alarms and signals and call for assistance prior to problem developing.
· Monitor all DP room alarms including DP system, VMS, and fire and gas alarms. Prioritize alarm response as necessary to maintain DP system operability by calling for technical assistance or additional DP room help
· Periodically visit the drill floor for familiarization with current rig personnel and operations
· Assist as directed by Master with rig projects and maintenance

· Completion of company ISM familiarization material

• Assist with running hydrophones and subsea beacons

· Manage the deck crews working outside with them as required
· Sound ballast and bulk tanks. Assist with loading and sampling of bulk products as required.
· Ensure there is adequate power and reserves of power for the maintenance of position and operations – give immediate attention to any problems.
· Operate the vessel’s radios & radars as needed
· Perform emergency duties and responsibilities as stated on the Station Bill, Emergency Response Manual and DP Emergency Response Plan
· Completion of company’s DP Lessons Learned Course

9. SENIOR TOOLPUSHER
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Supervise the drilling operations and associated activities and ensure it is in accordance with the well program.
· Ensure drilling operations are carried out in a safe, efficient and productive manner.

PREREQUISITES / QUALIFICATIONS:
· Bsc/HND–Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Knowledge of all technical calculations required for the safe operation of the drilling.
· Basic computer skills.
· Valid medical and vaccination certificate.

DUTIES AND RESPONSIBILITIES:
· Ensure pre-job meeting is carried out for all non-routine drilling operations.

· Ensure the Toolpusher, Driller is informed on an ongoing basis as to the well program objectives and communicate any changes in plans.

• Monitor the maintenance, repair and installation of all drilling equipment including repair, lubrication, maintenance records, and inventory levels.
• Maintain records of inspections and certification of drilling equipment, tools and tubular.
• Ensure the mud mixing systems and solid control equipment are being monitored constantly and properly maintained
• Relieve the Driller at the Driller’s console as operational requirement demands.
• Partake in the daily operations meeting with the OIM, and other rig department heads.
• Monitor the application of the Company Preventative Maintenance System program within the drilling department.
• Review and approve all drilling related work permits.
• Supervise equipment preparation for impending drilling operations.
• Assist in planning the job activities of the drilling department and associated activities.
• Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in an emergency situation.

· Perform all well control calculations (i.e. mud weight increase, initial and final circulating pressures, number of strokes, et cetera).
· Assist the OIM in coordinating the activities of third party personnel responsible for various aspects of the well program.
· Review the daily drilling operations report for accuracy and approve accordingly.
· Prepare Requisition Purchase Orders for equipment or parts necessary to keep the drilling operation free of downtime. Assist in ensuring sufficient stock of parts and materials are maintained
· Assist in the planning, organisation and supervision of rig move operations
· Maintain proper communication with the OIM regarding the progress of drilling and associated operations.
· Recommend adjustments to drilling parameters as necessary so as to improve the overall drilling operation’s performance
· Promote and maintain an effective working relationship with other departments, third party personnel and Client Representatives.

10. TOOLPUSHER
Location : Nigeria
Company: Reputed multinational oilfield service provider


BASIC FUNCTION:

• Supervise the drilling operations and associated activities and ensure it is in accordance with the well program.
• Ensure drilling operations are carried out in a safe, efficient and productive manner

PREREQUISITES / QUALIFICATIONS:
· Bsc/HND- Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Knowledge of all technical calculations required for the safe operation of the drilling.
· Basic computer skills.
· Valid medical and vaccination certificate.


DUTIES AND RESPONSIBILITIES:

• Ensure pre-job meeting is carried out for all non-routine drilling operations.
• Ensure the Driller is informed on an ongoing basis as to the well program objectives and communicate any changes in plans.
• Monitor the maintenance, repair and installation of all drilling equipment including repair, lubrication, maintenance records, and inventory levels.
• Maintain records of inspections and certification of drilling equipment, tools and tubular.
• Ensure the mud mixing systems and solid control equipment are being monitored constantly and properly maintained
• Relieve the Driller at the Driller’s console as operational requirement demands.
• Partake in the daily operations meeting with the OIM, Senior Tool pusher and other rig department heads.
• Monitor the application of the Company Preventative Maintenance System program within the drilling department.
• Review and approve all drilling related work permits.
• Supervise equipment preparation for impending drilling operations.
• Assist in planning the job activities of the drilling department and associated activities.
• Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in an emergency situation.

· Perform all well control calculations (i.e. mud weight increase, initial and final circulating pressures, number of strokes, et cetera).
· Assist the Senior Tool pusher or OIM in coordinating the activities of third party personnel responsible for various aspects of the well program.
· Review the daily drilling operations report for accuracy and approve accordingly.
· Prepare Requisition Purchase Orders for equipment or parts necessary to keep the drilling operation free of downtime. Assist in ensuring sufficient stock of parts and materials are maintained
· Assist in the planning, organisation and supervision of rig move operations
· Maintain proper communication with the Senior Tool pusher and OIM regarding the progress of drilling and associated operations.
· Recommend adjustments to drilling parameters as necessary so as to improve the overall drilling operation’s performance
· Promote and maintain an effective working relationship with other departments, third party personnel and Client Representatives.

11. DRILLER
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Operate drilling and mud circulating equipment as instructed in the well program and in accordance to Company policies and procedures.

EDUCATIONAL/PROFESSIONAL REQUIRMENT:

· HND/Bsc - Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.

• Proven ability to discharge the stated duties and responsibilities of the position.

· Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:
· Operate all equipment at the Driller’s console in a safe manner, maintain a clean, tidy and hazard free condition on the drill floor and associated area.
· Monitor the well condition at all times (i.e. depth, mud, weight, weight on bit. Interpret and respond to down hole conditions).
· Perform drilling related operations such as directional drilling, working struck pipe, running and cementing casing strings, coring, fishing, assisting in wire line logging, well testing, and other special operations
· Maintain accurate record of tubular and tool dimensions (i.e. internal and external diameter, fish neck, and serial numbers).
· Ensure the solid control equipment and mud mixing operations are being monitored constantly
· Keep accurate records of fluid displacement when tubulars are run in/pulled out of hole.
· Complete the IADC daily drilling report at the end of each tour
· Hold pre-job meeting with the drilling crew for all non-routine drilling operations.
· Secure the well during an emergency or well control situation - assist in the well killing operations
· Supervise the lubrication and maintenance of all drilling and associated equipment and ensure it is carried out in accordance to the Preventive Maintenance System.
· Maintain equipment files, drilling logs and records – perform all technical calculations required to carry out drilling operations.
· Assist during the running and retrieving of marine risers and BOP stack.
· Assist in the planning, organisation and supervision of rig move operations.

12. ASSISTANT DRILLER
Location : Nigeria
Company: Reputed multinational oilfield service provider

Basic Function:
· Assist the driller in operating drilling and mud circulating equipment as instructed in the well program and in accordance to Company policies and procedures.

Educational/Requirement:
· Bsc/Higher National Diploma (HND) in Engineering/ Geology/ related field.

· Minimum of 3 years’ relevant experience in drilling operations.

• Proven ability to discharge the stated duties and responsibilities of the position.

· Valid medical examination and vaccination certificates.

DUTIES AND RESPONSIBILITIES:
· Operate all equipment at the Driller’s console in a safe manner, maintain a clean, tidy and hazard free condition on the drill floor and associated area.
· Monitor the well condition at all times (i.e. depth, mud, weight, weight on bit. Interpret and respond to down hole conditions).
· Perform drilling related operations such as directional drilling, working struck pipe, running and cementing casing strings, coring, fishing, assisting in wire line logging, well testing, and other special operations
· Maintain accurate record of tubular and tool dimensions (i.e. internal and external diameter, fish neck, and serial numbers).
· Ensure the solid control equipment and mud mixing operations are being monitored constantly
· Keep accurate records of fluid displacement when tubulars are run in/pulled out of hole.
· Complete the IADC daily drilling report at the end of each tour
· Hold pre-job meeting with the drilling crew for all non-routine drilling operations.
· Secure the well during an emergency or well control situation - assist in the well killing operations
· Supervise the lubrication and maintenance of all drilling and associated equipment and ensure it is carried out in accordance to the Preventive Maintenance System.
· Maintain equipment files, drilling logs and records – perform all technical calculations required to carry out drilling operations.
· Assist during the running and retrieving of marine risers and BOP stack.
· Assist in the planning, organisation and supervision of rig move operations.

13. CRANE OPERATOR
Location : Nigeria
Company: Reputed multinational oilfield service provider

Basic Function:
· Operate the rig’s crane in a safe and efficient manner, and in accordance with Company policies and procedures.

Prerequisites/Qualifications:

· School Certificate/Technical Certificate with minimum of 8-10years’ work experience, or Ordinary National Diploma (ND) and above with minimum 3-5years’ work experience will be added advantage.

• Proven ability to discharge the stated duties and responsibilities of the position.

· FPSO experience will be added advantage.

14. CHIEF ELECTRICIAN
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Responsible for the installation, maintenance and repair of all electrical equipment onboard the rig.

PREREQUISITES / QUALIFICATIONS:
· Bsc/ HND Electrical Engineering degree. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Valid medical examination and vaccination certificates.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Knowledge of all technical calculations required for electrical operation of the drilling unit and basic computer skills.


DUTIES AND RESPONSIBILITIES:

• Ensure daily inspections and maintenance on electrical equipment are carried out.
• Ensure that the permit to work system is in place and followed.
• Participate in the effective management of the Preventive Maintenance System (PMS) – ensure all records are maintained on a timely basis.
• Carry out periodic maintenance according to the PMS guidelines and coordinate same with supervisor and other department heads.
• Operate, maintain and repair power generation and distribution equipment, i.e. generators and engine controls, SCRs, switchgears, transformers, et cetera.
• Maintenance and repair general rig equipment such as HVAC system, refrigeration plants, power and communication systems, lighting, et cetera.
• Carry out maintenance and repair on electrical components of drilling equipment, i.e. Driller’s console, DC drilling motors and auxiliaries, Top Drive System, draw works, mud pumps, et cetera.
• Carry out maintenance and repair on electrical components of marine equipment, i.e. thruster motors and auxiliaries, ballast pumps, control panels, cranes, et cetera.
• Perform and interpret power calculations, power factor, insulation tests, and positive relay tests as required.
• Study and understand electrical schematics and logic diagrams as required.
• Gather data from instruments interpret past and present performance to understand trends and ensure problems are solved.
• Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation – generate requisitions as required.
• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig.
• Implement the outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management.
• Ensure that reports for repair and maintenance of equipment are accurate and complete.
• Assist in supplying information for maintenance and repair budget.
• Communicate equipment problems or breakdown information via direct supervisor to Field Support Group.

15. CHIEF ELECTRONIC TECHNICIAN
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Install, repair and maintain electronic equipment onboard the rig.

PREREQUISITES / QUALIFICATIONS:
· Bsc/HND-Electronic Technology/Engineering degree. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Valid medical examination and vaccination certificates.
· Knowledge of all technical calculations required for electronic operation of the drilling unit and basic computer skills.


DUTIES AND RESPONSIBILITIES:

• Carry out daily inspections and maintenance on electronic equipment are carried out.

• Ensure that the permit to work system is in place and followed.
• Participate in the effective management of the Preventive Maintenance System (PMS) – ensure all records are maintained on a timely basis.
• Maintain and repair all electronic systems including Dynamic Positioning, communication, data acquisition, computers and navigational equipment.
• Maintain and repair electronic systems in relation to Subsea BOP equipment and drilling package instrumentation and electronics.
• Carry out installation, calibration, and modification to electronic systems and components are properly carried out.
• Provide technical support, domestic and industrial electronic services to all areas of the rig.
• Carry out periodic maintenance according to the PMS guidelines and coordinate same with supervisor and other department heads.
• Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation – generate requisitions as required.
• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig.
• Implement the outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management.
• Ensure that reports for repair and maintenance of equipment are accurate and complete.
• Assist the Maintenance Supervisor/Chief Engineer in supplying information for maintenance and repair budget.
• Communicate equipment problems or breakdown information via direct supervisor to Field Support Group.
• Ensure all electronic equipment brought onto the rig, including third party equipment is suitably certified and meets regulatory requirements.
• Plan and coordinate with other departments prior to any major activity such as inspections, rig move, et cetera.

16. CHIEF ENGINEER
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Supervise and control the maintenance and repair of mechanical, electrical, electronics, subsea, and information technology equipment on the rig.

PREREQUISITES / QUALIFICATIONS:
· Bsc/HND- Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Valid unlimited Chief Engineer License (Class 1 Motor above 3000kW).
· Valid medical examination and vaccination certificates.
· Knowledge of all technical calculations required for the safe operation of the drilling unit and basic computer skills.

DUTIES AND RESPONSIBILITIES:
· Ensure that all subordinates have the necessary skills and experience to fulfill their assigned tasks in a safe and efficient manner.

· Maintain control over the rig’s Preventive Maintenance System (PMS) and associated computer database.

• Plan the service and maintenance of equipment according to the PMS guidelines.
• Ensure that reports for repair and maintenance of equipment are accurate and complete.
• Carry out classification society surveys as part of continuous survey of machinery.
• Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig’s stability.
• Ensure that the permit to work and isolation systems are strictly adhered to in the maintenance department.
• Coordinate maintenance activities with the OIM and other department heads.
• Inform the OIM and other department heads of any technical problems or limitations that may affect the safe operation of the rig.
• Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation.
• Supply information for maintenance and repair budget.

· Maintain proper communication with shore based Field Support group and rig management.
· Liaise with the OIM to ensure that all third party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig.
· Implement the follow up requirements to audits, as issued by Clients, Regulatory Authorities or rig management.
· Approve all maintenance department requisition purchase orders.
· Supply rig management with maintenance statistics of the vessel.
· Advise on ways of making improvements to the inventory kept on the rig.
· Document any and all changes to t Provide input in the Survey of the vessel and ways to reduce the out of service time of the vessel.
· Exercise fiscal responsibility with regard to maintenance budget.
· Train personnel on the use of the PMS system to reduce error in the system.
· Communicate equipment problems or breakdown information via direct supervisor to Field Support Group.

17. CHIEF MECHANIC
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Maintain and repair mechanical, pneumatic and hydraulic equipment onboard the rig.

PREREQUISITES / QUALIFICATIONS:
· Bsc/HND- Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Valid medical examination and vaccination certificates.
· Knowledge of technical calculations required for safe operation of the drilling unit and basic computer skills.


DUTIES AND RESPONSIBILITIES:

• Perform daily inspections and maintenance on mechanical equipment.
• Organize and promote the Preventive Maintenance System (PMS).
• Carry out periodic maintenance according to the PMS guidelines and coordinate same with supervisors and other department heads.
• Maintain and repair power plants and monitor power distribution – ensure power is available at all times.
• Operate, maintain and repair as necessary the engine cooling water system, lube oil system, and fuel system.
• Troubleshoot and repair faulty mechanical, pneumatic and hydraulic drilling equipment and tools.
• Assist in maintaining marine equipment, i.e. cranes, thrusters, ballast pumps and valves, auxiliary equipment, et cetera
• Ensure the permit to work and isolation systems is followed.
• Implement the follow up requirements to audits, as issued by Clients, Regulatory Authorities or rig management.
• Assist in ensuring that all third party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig.
• Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation.
• Supply information to assist in the development of a maintenance and repair budget.
• Ensure that service, maintenance and other operational reports are accurate and complete.
• Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig’s stability.
• Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig.
• Plan and coordinate with other departments prior to any major activity such as rig moves, running and retrieving BOP, et cetera.
• Carry out classification society surveys as part of continuous survey of machinery.
• Communicate equipment problems or breakdown information via direct supervisor to Field Support Group.

18. MAINTENANCE SUPERVISOR
Location : Nigeria
Company: Reputed multinational oilfield service provider

BASIC FUNCTION:
· Supervise and control the maintenance and repair of mechanical, electrical, electronics, subsea, and information technology equipment on the rig.

PREREQUISITES / QUALIFICATIONS:
· Bsc / HND – Engineering. Work experience and demonstrated ability of oral and written communications may be substituted in lieu of formal education.
· Proven ability to discharge the stated duties and responsibilities of the position.
· Valid medical examination and vaccination certificates.
· Knowledge of all technical calculations required for the safe operation of the drilling unit and computer skills.



DUTIES AND RESPONSIBILITIES:

• Maintain control over the rig’s Preventive Maintenance System (PMS) and associated computer database.
• Coordinate periodic maintenance activities with the OIM and other department heads.
• Plan the service and maintenance of equipment according to the PMS guidelines.
• Ensure that reports for repair and maintenance of equipment are accurate and complete.
• Carry out classification society surveys as part of continuous survey of machinery.
• Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig’s stability.
• Ensure that the permit to work and isolation systems are strictly adhered to in the maintenance department.
• Inform the OIM and other department heads of any technical problems or limitations that may affect the safe operation of the rig.
• Maintain an adequate supply of spares in order to fulfil maintenance requirements and facilitate a safe and efficient operation.
• Supply information for maintenance and repair budget.
• Maintain proper communication with shore based Field Support group, rig management, and equipment vendors.

· Liaise with the OIM to ensure that all third party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig.
· Implement the follow up requirements to audits, as issued by Clients, Regulatory Authorities or rig management.
· Approve all maintenance department requisition purchase orders.
· Supply rig management with maintenance statistics of the vessel.
· Advise on ways of making improvements to the inventory kept on the rig.
· Document any and all changes to the PMS system and provide reasons for making these changes to Rig Manager via direct supervisor.
· Provide input in the Survey of the vessel and ways to reduce the out of service time of the vessel.
· Exercise fiscal responsibility with regard to maintenance budget.
· Train personnel on the use of the PMS system to reduce error in the system.
· Communicate equipment problems or breakdown information via direct supervisor to Field Support Group.

Interested candidates to forward their CVs to [email protected] or call 08023556070, 07038650184 for more details.