Flow Assurance Practical Training in Port Harcourt

99% Practical Oriented Training
For contact and training venue in Port Harcourt call
Port Harcourt
IK Idegwue , Tel: 08032766980
Address: 71 Ada George Road, Port Harcourt

For further enquiry contact us:
Tel: +234 - 813 3476 558, +234 - 708 574 0887,
Opebi Allen Ikeja, Lagos State, Nigeria
Email: [email protected], [email protected]
Website: www.vogwconcept.com


COURSE OUTLINE

MODULE 1
1.0. Fluid Properties and Phase behaviour modeling
1.1. Component of production system
1.2. Flow assurance concerns that need to be examined:


  • Pipeline rupture from corrosion
  • Pipeline blockage from hydrates or wax
  • Severe slugging can damage separator
  • Large pressure drop in pipelines can cause lower flow than should be


MODULE 2
2.1. Flow assurance strategies that need to be adopted:


  • Hydraulic Analysis – acceptable pressure drops, pipeline size, erosion & corrosion limits
  • Thermal Analysis – temperature distribution, heat loss
  • Inhibition Analysis – hydrate inhibitors, wax inhibitors, corrosion inhibitors, scale inhibitors


2.2. Flow assurance strategies Terms
· Beggs and Brill method
· Volume fraction, holdup and water cut
· Superficial velocity
· Mixture velocity and density
· Mass conservation
· Momentum conservation
· Energy conservation
· Mass transfer between phases
· Subsonic vs. transonic, supersonic and hypersonic flows

MODULE 3
3.1. Steady State Design:


  • Hydraulics
    • Line Sizing
    • Pressure Drop
    • Max./Min. Velocity
    • Flow Regime Prediction
    • Slugging (Hydrodynamic and Severe Slugging)
      • Pots equation for Severe Slugging (or Terrain Slugging)
      • Mean Slug Length and Probabilistic Model for
        • Slug Length (Hill & Wood Method)
        • Maximum Slug Length = 6 times the mean slug length
        • Slug Frequency (Hill & Wood Method)


3.2· Pigging slugs
o A quasi-transient model of Baker – McDonald


  • Thermal
    • Insulation Requirements:
      • Hydrate Formation
      • Wax Deposition


    • Insulation Types
    • Pipe-in-Pipe
    • Wet Insulation
    • Flexible Pipe


MODULE 4
4.1 Transient Design:


  • Shut Down
    • Planned
    • Unplanned
    • Extended


  • Depressurisation
  • Blow Down
  • Turn Down – Ramp up (For Gas Condensate Systems)
  • Start-up
  • Cold Start-up
  • Warm Start-up
  • Interrupted Start-up
  • Pigging
  • Presentation of Result and Project reporting
  • Project work/ Case study




For contact and training venue in Port Harcourt call

IK Idegwue
Tel: 08032766980
71 Ada George Road, Port Harcourt

For further enquiry contact us:
Tel: +234 - 813 3476 558, +234 - 708 574 0887,
Opebi Allen Ikeja, Lagos State, Nigeria
Email: [email protected], [email protected]
Website: www.vogwconcept.com